- Home
- ยป
- Our Products
- »
- LED Bulb Driver
LED Bulb Driver
Inelectronics, an LED circuit or LED driver is an electrical circuit used to power alight-emitting diode(LED). The circuit must provide sufficient current to light the LED at the required brightness, but must limit the current to prevent damaging the LED. Thevoltage dropacross an LED is approximately constant over a wide range of operating current; therefore, a small increase in applied voltage greatly increases the current. Very simple circuits are used for low-power indicator LEDs. More complex,current sourcecircuits are required when driving highpower LEDs for illumination to achieve correct current regulation.
Basic of Led Driver
The simplest circuit to drive an LED is through a series resistor. It is commonly used for indicators and digital displays in many consumer appliances. However, this circuit is not energy-efficient, because energy is dissipated in the resistor as heat.
An LED has a voltage drop specified at the intended operating current.Ohm's lawandKirchhoff's circuit lawsare used to calculate the appropriate resistor value, by subtracting the LED voltage drop from the supply voltage and dividing by the desired operating current. With a sufficiently high supply voltage, multiple LEDs in series can be powered with one resistor.
If the supply voltage is close or equal to the LED forward voltage, then no reasonable value for the resistor can be calculated, so some other method of current limiting is used.
Power source considerations Led DriverThe voltage versus current characteristics of an LED are similar to anydiode. Current is approximately anexponential functionof voltage according to theShockley diode equation, and a small voltage change may result in a large change in current. If the voltage is below or equal to the threshold no current flows and the result is an unlit LED. If the voltage is too high the current exceeds the maximum rating, overheating and potentially destroying the LED.
As an LED heats up, its voltage drop decreases (band gap decrease[1]). This can encourage the current to increase.
7W-9W LED Bulb Driver
Minimum Order Quantity: 100 Piece
Wattage | 7W-9W |
Type | DRIVER |
Output Voltage | 27V-85V |
Usage/Application | LED Bulb / Concealed Light / Downlight |
Brand | Custom |
Power Factor | >0.95 |
Current | 100 ma |
Input Voltage | 85V-240V |
Voltage | 85V-240 V |
Model Name/Number | PU-374V1 |
Power Consumption | Low |
Country of Origin | Made in India |
Surge Protection | Upto 4KVA |
Frequency | 50HZ- 60HZ |
Additional Information:
- Production Capacity: 2000000
- Delivery Time: SAME DAYS
- Packaging Details: 1200 EACH BOX
12W-15W Bulb Driver (200 MA)
Brand | Custom |
Usage/Application | LED Bulb |
Power Consumption | 12W-15W |
Shape | Rectangular |
Input Voltage | 220V-240V |
Current | 150 ma, 200ma |
Power Factor | >0.95 |
Country of Origin | Made in India |
Phase | Single Phase |
Surge Protection | Upto 4.0KVA |
Driver Type | HPF Driver |
Frequency | 50HZ-60HZ |
Additional Information:
- Production Capacity: Depends on Order
- Delivery Time: 7-10 Days
LED Bulb LPF Driver
Minimum Order Quantity: 100 Piece
Efficiency | 85% - 90% |
Brand | custom |
Driver Wattage | 3W-9W |
Output Voltage | 60V-85V |
Current | 100mA |
Application | LED BULB |
Country of Origin | Made in India |
Power Consumption | Low |
Additional Information:
- Production Capacity: 4000000
- Delivery Time: 7 Days
LPF LED Driver
Minimum Order Quantity: 100 Piece
Country of Origin | Made in India |
Brand | Custom |
Driver Type | LPF |
Current | 60Ma |
Usage/Application | LED Bulb |
Additional Information:
- Production Capacity: 4000000
- Delivery Time: 7 Days
50W High Watt LED Bulb Driver
Minimum Order Quantity: 100 Piece
Driver Wattage | 50W |
Frequency | 50Hz-60Hz |
Material Used | IC Driver |
Application | High Watt Bulb |
Country of Origin | Made in India |
Features:
- Best quality
- High performance
- Reasonable Price
Additional Information:
- Delivery Time: 7 Days
40W High Watt LED Bulb Driver
Minimum Order Quantity: 100 Piece
Driver Wattage | 40W |
Frequency | 50Hz-60Hz |
Material Used | IC Driver |
Application | High watt Bulb/ Electronics |
Country of Origin | Made in India |
Features:
- Best quality
- High performance
- Reasonable Price
Additional Information:
- Delivery Time: 7 Days
30W High Watt LED Bulb Driver
Minimum Order Quantity: 100 Piece
Driver Wattage | 30W |
Frequency | 50Hz-60Hz |
Material Used | IC Driver |
Application | High Watt Bulb / Electronics |
Country of Origin | Made in India |
Features:
- Best quality
- High performance
- Reasonable Price
Additional Information:
- Delivery Time: 7 Days
9W Rechargeable Bulb Driver ( J2 )
Minimum Order Quantity: 100 Piece
Efficiency | 85% |
Brand | Custom |
Driver Wattage | 9W |
Frequency | 50Hz - 60Hz |
Material Used | Aluminum |
Power Factor | 0.9 |
Application | For ACDC Bulb |
Country of Origin | Made in India |
Additional Information:
- Delivery Time: 7 Days
7W-9W LED Bulb Driver (BH2)
Minimum Order Quantity: 100 Piece
Model Name/Number | NSR-11 |
Usage/Application | LED BULB |
Output Voltage | 60V-85V |
Brand | Custom |
Driver Wattage | 7W-9W |
Raw Material Type | Driver |
Power Consumption | Low |
Input Voltage | 100V-240V |
Current | 100 ma, 120 ma |
Power Factor | >0.95 |
Country of Origin | Made in India |
Surge Protection | Upto 4.0 KVA |
Features:
- Optimum functionality
- Precise dimension
- Compact design
Additional Information:
- Production Capacity: 4000000
- Delivery Time: 7-10 Days
10W LED T Bulb Driver
Minimum Order Quantity: 100 Piece
Brand | Custom |
Usage/Application | Led Bulb |
Input Phase | Single Phase |
Power Consumption | Low |
Available Wattage | 10W |
Surge Protection | Upto 4.0 KVA |
Wattage | 10W |
Efficiency | 85% - 90% |
Current | 240ma |
Power Factor | >0.95 |
Country of Origin | Made in India |
Frequency | 50HZ-60HZ |
THD | >10% |
We are the leading manufacturer, supplier, trader, and exporter of a wide series of LED bulb drivers. Keeping in mind the various requirements of the customers we manufacture unmatchable quality LED T Bulb drivers under the guidance of adept experts and professional engineers. Clients can order these drivers from us as per their specific requirements. These LED T Bulb Drivers are known for their quality. Further, the offered LED T Bulb Drivers that are extensively used for LED production to have very high refractive indices.
Features:
- Efficient design
- Longer functionality
- Superlative performance
- Premium quality
Additional Information:
- Production Capacity: 4000000
- Delivery Time: 7-10 Days
18W HPF Driver For LED Bulb
Minimum Order Quantity: 100 Piece
Brand | Custom |
Driver Wattage | 18W |
Frequency | 50HZ- 60HZ |
Material Used | IC Driver |
Output Current | 240ma |
Power Factor | >0.95 |
Country of Origin | Made in India |
Features:
- Best quality
- High performance
- Reasonable Price
Additional Information:
- Production Capacity: 4000000
- Delivery Time: 7 Days
20W HPF Driver For LED Bulb
Driver Wattage | 18W-20W |
Brand | custom |
Power Factor | >0.95 |
Output Current | 240ma |
Material Used | IC Driver |
Frequency | 50HZ- 60HZ |
Country of Origin | Made in India |
Used For | Commercial LED Bulb |
Surge Protection | Upto 3.5KVA |
Driver Type | Non-Isolated |
Input Voltage | 90V-240V AC |
Features:
- Best quality
- High performance
- Reasonable Price
Additional Information:
- Production Capacity: Depends On Order
- Delivery Time: 7-10 Days